Filters
Contents
To create a filter for monitoring events, click on the ADMINISTRATE > Supervision > Access events > Filters menu and then:
1.Click on the 
button.
2.Enter a Description for this filter.
3.Enter an explicit Comment that will describe the use of this filter, if necessary.
4.Enable the Shared check box if you want other users to be able to use this filter to print event monitoring tasks.
5.Activate the Private box if you do not want this filter to be modified by another person.
6.Click on the Where tab then add or delete the accesses, areas or sites that you wish to monitor using the 
and 
buttons.
7.Click on the What tab then add or delete events (authorised access, for example) using the and buttons.
8.Click on the Hardware tab then on the Modify button. Enable the corresponding check boxes for the readers, door openers, etc. as relevant to the monitoring task and then click Save.
|
If no box is activated, the monitoring will apply to all the hardware by default. However, if an area and/or access is selected, the Hardware tab disappears. |
9.Click on Save to confirm the saving of this filter.