Infrastructure
Contents
This screen is used to view your Infrastructure:
•Tree view, with a graphical view of access control hardware and time & attendance management where applicable
•Full and comprehensive Kelio architecture
•Easier hardware installation and maintenance
•Multi-site view
Create a hardware device
The declaration of hardware is done from Hardware > Infrastructure > Hardware devices.
1.To add hardware, select the existing site or hardware and right-click on Create a hardware device.
2.Select the Type and Hardware from the drop-down menu and Validate.
3.The setup window opens. A photo of your hardware will allow you to check it is the right type.
4.Complete all the fields necessary for the operation of the hardware.
5.Validate.
|
In the case of Command in "free access" period, Kelio will continuously power the door opener during the free access period. Warning! If the door opener fitted on this access cannot support a continuous power supply, this box must not be activated. |
|
You can illustrate each access point using the icons, making administration easier. |
Create a power supply
Declaration of power supplies is done from Hardware > Infrastructure > Power supplies.
1.Click on 
to add a power supply.
2.Enter a Title, Abbreviation, and Description of the power supply to be configured.
3.Choose a Template and Power supply voltage from the drop-down menus.
4.Save.
|
The screen will display a list of hardware devices powered by this supply once the link has been established from the hardware declaration. |
Customise the display
You can select customisations that have already been created from the drop-down menu 
.
To access the screen for creating customisations, click on the icon 
of the resources area The menu displays the list of all customisations already created and gives the opportunity to create a new customisation:
1.Click on 
in the bottom left of the window or 
to copy an existing customisation.
2.Enter a Description.
3.Select the data displayed under the hardware device (Description, Abbreviation, or IP Address).
4.Enable the different Filters by checking the respective boxes.
5.Save.