Configuring a view

1.Select Monitoring events as and when.

a.Apply the filters created before or

b.Modify, if necessary, the selections made when creating the filter (Where,What and Hardware tabs). By default, the monitoring will be done for everyone. In the Who tab however, you have the possibility, by activating the boxes, to specify for which employees you want to carry out the monitoring for the locations, on the hardware and for the event types set up when creating the filter.

Or

2.Select Graphic supervision.

1.Select a Plan from the plans configured in the Kelio Access Setup section.

2.Add the supervision toolbar.

3.Display the authorised access points to indicate all authorised access points on the doors.

1.The check boxes activated determine the access elements concerned which may be displayed.

2.Choose the visual warning mode on the supervision plan - Blinking of the object concerned or Blinking of the zone and object concerned.

3.Indicate the Display duration (before automatic acknowledgement). If an anomaly occurs, the software warnings (configured in the management rules or in the alarm configuration) with automatic acknowledgement by timeout will disappear after a time set here.

4.Click on the Confirm button.